|
|
Saturday, 19. April 2008
Bynase on the Tiny2313
rsbohn
09:01h
I put a bynase receiver on my Tiny2313 on the WOSP display board. I found an old source code that didn't work. It took me several hours to figure out how to get the LED driver code working. Now I can display the ramp chip in binary. I can also just put a long wire 'antenna' on the input and watch the lights flash. This could be a reasonable electromagnetic field detector! But no, it's going to be part of the world's dumbest calculator. I still need to build the keyboard section which will read a bank of 8 switches. The current numeric input goes via bynase to the main processor. The plus and minus switches connect directly to the main processor. The keyboard won't be a real bynase system because it won't have the pull-up resistors disabled. I'll probably put a switch in that line and a socket where you can plug in real bynase networks (or long-wire antennas). So the system is a dumb calculator but a usable bynase display.
|
8171 days of detection
mod: 12/3/08, 5:42 AM days of detection... PMOG owner
BiographyRandall Bohn lives in Orem, Utah, USA. He works as a Software Quality Engineer. He is a big fan of the AVR line of microcontrollers. He has been in the computer industry since 1989. Randall is married and has three children. rsbohn can be reached via gmail.com. status
Youre not logged in ... Login
Amazon.com DVD Shop
Amazon.com DVD Shopmenu
search
related
calendar
recent updates
Arduino Starter Kit
MAKE Blog How-to Tuesday posted a challenge: Optimize the sketch code for a pressure sensor bar graph. Here is my second attempt: int gate[] = {10, 20, 50, 100, 200, 32767}; void setup() {DDRB = 0b00111110;} void loop() { int dval = 0; int rval = analogRead(2); for (int x = 0; rval... 12/3/08, 5:42 AM Measuring Supply Voltage
I'm running my latest handheld computer on solar power. It starts up when the sun rises and runs all day. I started wondering how I could measure the voltage coming in from the solar panel. I came up with a way to use a diode and a resistor and the... 7/29/08, 9:53 AM Ten Pin ISP adapter
I've already built a six pin ISP adapter, but my Olmex cards use the ten pin ISP. I put a header on a scrap of perf board, added an LED for the heartbeat, and then connected the ten pin cable. Actually it is a fifteen pin cable, off a joystick... 7/16/08, 10:00 PM Hello 5x7 Style
Wrote a new firmware for the 5x7 display. Now it scrolls out 'hello' over and over again. I'm running it on a solar panel, so it wakes up with the sun and runs all day long. When I built the LED matrix I put resistors on the five columns. I'm starting... 6/17/08, 12:48 PM Provo, Utah
With a walkable downtown and access to two Universities, Provo Utah is a great location. I live next door in Orem. Kipplinger: Provo: Pristine Tech Mecca (Video) (Text) 6/2/08, 10:07 AM Another release of AVRISP sketch
There is a new release of the AVRISP emulation sketch for Arduino: avrisp.02.zip. This one should work with Mega8 and Mega168. mega-isp 5/28/08, 4:48 PM Sorting Out Page Sizes
There is a new release of AVRISP Emulation for Arduino. This is an Arduino firmware that allows you to program other AVR microcontrollers. The new zip file (avrisp.01.zip) should compile on the current Arduino IDE, and I changed the comments that put the wrong labels on the SPI pins. Go ahead... 5/27/08, 11:31 AM Flash Problems
I'm building a project using the AVR ATMega8 microcontroller. Once I got the thing wired up to where I could write firmware to it I found that it was always failing. I made a .hex file full of 0x10 values (256 bytes worth) and tried uploading that to the chip.... 5/16/08, 2:56 PM William's Arduino Board
I'm building an Arduino-compatible board for William. I'm building it on the Evil Mad Scientist MegaXX8 business card. It will have four built-in LEDs and a USB interface. It will also have connectors so he can use it with a breadboard. Perhaps we can connect it to some of his... 5/15/08, 7:26 AM Cybord Signal Detector
Some digital radio signals use Frequency Shift Keying (FSK). This often has one frequency for a Mark and one for a Space. I plan to build a cybord or other chip that will decode an FSK signal, producing three different values: NO_SIGNAL, MARK, and SPACE. The signals would then go... 5/15/08, 7:20 AM destinations
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
