|
|
Tuesday, 21. March 2006
Arduino as Programmer
rsbohn
15:43h
I'm working on using the Arduino board as a programmer for my ATtiny15L chips. The base idea is to send the 15L program to the Arduino board (usb!) and then the Arduino sends the program to the chip using SPI. The wiring is real easy. I use pin 7 for MOSI, 6 for MISO, and 5 for clock. I put the 15L in the wireless breadboard. I'm also taking 5V and ground from the Arduino also. The software's the tricky part here. My first attempt just runs a 1Hz signal on SCK (clock, pin 5) to an LED on the wireless breadboard. That's working, so I start sending the 'program enable' bytes on MOSI. A second LED shows that this signal is working. Program enable is 4 bytes, with one byte back during byte 3. So I echo the return byte back up the USB. $A6 is wrong, so I send more debug info up the USB. I'm getting an extra bit somewhere, so I deal with that and get the proper value, $53. The next step is to check the signature bytes on the tiny15L. It should be $1E $09 $06, but I'm getting $1E $10 $06. Not sure why. Have to sort it out next time. Eventually I will upload the tiny15 code to a buffer on the Arduino, then a command from the computer starts the upload to the tiny15. Stay tuned!
|
8140 days of detection
mod: 12/3/08, 5:42 AM days of detection... PMOG owner
BiographyRandall Bohn lives in Orem, Utah, USA. He works as a Software Quality Engineer. He is a big fan of the AVR line of microcontrollers. He has been in the computer industry since 1989. Randall is married and has three children. rsbohn can be reached via gmail.com. status
Youre not logged in ... Login
Amazon.com DVD Shop
Amazon.com DVD Shopmenu
search
related
calendar
recent updates
Arduino Starter Kit
MAKE Blog How-to Tuesday posted a challenge: Optimize the sketch code for a pressure sensor bar graph. Here is my second attempt: int gate[] = {10, 20, 50, 100, 200, 32767}; void setup() {DDRB = 0b00111110;} void loop() { int dval = 0; int rval = analogRead(2); for (int x = 0; rval... 12/3/08, 5:42 AM Measuring Supply Voltage
I'm running my latest handheld computer on solar power. It starts up when the sun rises and runs all day. I started wondering how I could measure the voltage coming in from the solar panel. I came up with a way to use a diode and a resistor and the... 7/29/08, 9:53 AM Ten Pin ISP adapter
I've already built a six pin ISP adapter, but my Olmex cards use the ten pin ISP. I put a header on a scrap of perf board, added an LED for the heartbeat, and then connected the ten pin cable. Actually it is a fifteen pin cable, off a joystick... 7/16/08, 10:00 PM Hello 5x7 Style
Wrote a new firmware for the 5x7 display. Now it scrolls out 'hello' over and over again. I'm running it on a solar panel, so it wakes up with the sun and runs all day long. When I built the LED matrix I put resistors on the five columns. I'm starting... 6/17/08, 12:48 PM Provo, Utah
With a walkable downtown and access to two Universities, Provo Utah is a great location. I live next door in Orem. Kipplinger: Provo: Pristine Tech Mecca (Video) (Text) 6/2/08, 10:07 AM Another release of AVRISP sketch
There is a new release of the AVRISP emulation sketch for Arduino: avrisp.02.zip. This one should work with Mega8 and Mega168. mega-isp 5/28/08, 4:48 PM Sorting Out Page Sizes
There is a new release of AVRISP Emulation for Arduino. This is an Arduino firmware that allows you to program other AVR microcontrollers. The new zip file (avrisp.01.zip) should compile on the current Arduino IDE, and I changed the comments that put the wrong labels on the SPI pins. Go ahead... 5/27/08, 11:31 AM Flash Problems
I'm building a project using the AVR ATMega8 microcontroller. Once I got the thing wired up to where I could write firmware to it I found that it was always failing. I made a .hex file full of 0x10 values (256 bytes worth) and tried uploading that to the chip.... 5/16/08, 2:56 PM William's Arduino Board
I'm building an Arduino-compatible board for William. I'm building it on the Evil Mad Scientist MegaXX8 business card. It will have four built-in LEDs and a USB interface. It will also have connectors so he can use it with a breadboard. Perhaps we can connect it to some of his... 5/15/08, 7:26 AM Cybord Signal Detector
Some digital radio signals use Frequency Shift Keying (FSK). This often has one frequency for a Mark and one for a Space. I plan to build a cybord or other chip that will decode an FSK signal, producing three different values: NO_SIGNAL, MARK, and SPACE. The signals would then go... 5/15/08, 7:20 AM destinations
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
