|
|
... Previous page
Thursday, 13. December 2007
Tiny24, Tiny25
rsbohn
13:40h
Just figured out today that the Tiny25 is a good replacement for the Tiny15. I'm looking at getting a few Tiny24's for my next set of projects. ... Link Wednesday, 5. December 2007
mega-isp
rsbohn
13:18h
Like to use your arduino as an in-system programmer (ISP)? Check out mega-isp on code.google.com ... Link Monday, 19. November 2007
WOSP work continues
rsbohn
11:24h
After a long break I'm looking at WOSP again. I'd like to finish this project so I can move on to other (radio-type) things. I'm going to make the switches be the base of the programmer. I'll add sides and a backboard, then mount the circuit boards on the backboard. The Mega8 will be the main processor, but it will use the Tiny2313 to run the switch bank and the LED output section. The Mega8 will also be connected to the USB port. I'll have to add another chip to drive the switch bank. The Tiny2313 will send a reset, then clock 8 bits out, reading 8 bits back in from the switches. So the switch driver will turn each switched line on in turn and the Tiny2313 will capture the switch setting. It will have to interleave all this with driving the LED array and communicating with the Mega8. I'll start by programming the EEPROM on the 2313 and adding a 'RUN MODE', where it will cycle through the 64 bits...You program in each step and then what you see is what you get. A second application would be to make a CA that would interpret the EEPROM contents... Maybe I should just skip the Mega8 and the USB link for now. All this could be done just on the 2313 chip. Part of the problem is that I wired the 2313 up to the LED array and then found that I had used the Serial IO pins. If I could do it again I would keep those free and use something else to drive the LEDs. I really need to get to where I can get my own PC boards fabbed. ... Link ... Next page
|
8144 days of detection
mod: 12/3/08, 5:42 AM days of detection... PMOG owner
BiographyRandall Bohn lives in Orem, Utah, USA. He works as a Software Quality Engineer. He is a big fan of the AVR line of microcontrollers. He has been in the computer industry since 1989. Randall is married and has three children. rsbohn can be reached via gmail.com. status
Youre not logged in ... Login
Amazon.com DVD Shop
Amazon.com DVD Shopmenu
search
related
calendar
recent updates
Arduino Starter Kit
MAKE Blog How-to Tuesday posted a challenge: Optimize the sketch code for a pressure sensor bar graph. Here is my second attempt: int gate[] = {10, 20, 50, 100, 200, 32767}; void setup() {DDRB = 0b00111110;} void loop() { int dval = 0; int rval = analogRead(2); for (int x = 0; rval... 12/3/08, 5:42 AM Measuring Supply Voltage
I'm running my latest handheld computer on solar power. It starts up when the sun rises and runs all day. I started wondering how I could measure the voltage coming in from the solar panel. I came up with a way to use a diode and a resistor and the... 7/29/08, 9:53 AM Ten Pin ISP adapter
I've already built a six pin ISP adapter, but my Olmex cards use the ten pin ISP. I put a header on a scrap of perf board, added an LED for the heartbeat, and then connected the ten pin cable. Actually it is a fifteen pin cable, off a joystick... 7/16/08, 10:00 PM Hello 5x7 Style
Wrote a new firmware for the 5x7 display. Now it scrolls out 'hello' over and over again. I'm running it on a solar panel, so it wakes up with the sun and runs all day long. When I built the LED matrix I put resistors on the five columns. I'm starting... 6/17/08, 12:48 PM Provo, Utah
With a walkable downtown and access to two Universities, Provo Utah is a great location. I live next door in Orem. Kipplinger: Provo: Pristine Tech Mecca (Video) (Text) 6/2/08, 10:07 AM Another release of AVRISP sketch
There is a new release of the AVRISP emulation sketch for Arduino: avrisp.02.zip. This one should work with Mega8 and Mega168. mega-isp 5/28/08, 4:48 PM Sorting Out Page Sizes
There is a new release of AVRISP Emulation for Arduino. This is an Arduino firmware that allows you to program other AVR microcontrollers. The new zip file (avrisp.01.zip) should compile on the current Arduino IDE, and I changed the comments that put the wrong labels on the SPI pins. Go ahead... 5/27/08, 11:31 AM Flash Problems
I'm building a project using the AVR ATMega8 microcontroller. Once I got the thing wired up to where I could write firmware to it I found that it was always failing. I made a .hex file full of 0x10 values (256 bytes worth) and tried uploading that to the chip.... 5/16/08, 2:56 PM William's Arduino Board
I'm building an Arduino-compatible board for William. I'm building it on the Evil Mad Scientist MegaXX8 business card. It will have four built-in LEDs and a USB interface. It will also have connectors so he can use it with a breadboard. Perhaps we can connect it to some of his... 5/15/08, 7:26 AM Cybord Signal Detector
Some digital radio signals use Frequency Shift Keying (FSK). This often has one frequency for a Mark and one for a Space. I plan to build a cybord or other chip that will decode an FSK signal, producing three different values: NO_SIGNAL, MARK, and SPACE. The signals would then go... 5/15/08, 7:20 AM destinations
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
