|
|
Friday, 3. August 2007
/RESET Pullup for Tiny15L
rsbohn
11:37h
I'm building a coin-flip device using the Atmel ATtiny15L. I bought a few way back when I got my Butterfly from Digikey. Anyway, I could program the chip just fine, but it wouldn't ever start running. I don't know what made me think of it, but I tied the reset line HIGH and it started working! I guess the 15L doesn't have an internal pullup on the /RESET line, so it was just floating. I didn't have this problem with the Tiny13 or Tiny2313 chips. The coin-flip is fun. You push a button and the two LED's start flashing, then they slow down and stop on one: Green for heads, Red for Tails. It waits a bit, then shuts everything down. Push the button and it wakes up and does another flip. I'll have to check the current drain while it sleeps, but I think it will not be too much. I leave the counter running on the chip, I think it makes it more likely to seem random. I sample the lowest bit of the counter when you release the button, and the counter is fast enough that you have about a 50/50 chance of getting a one there. The rest of the flashing is just for show. I'm planning to build this in permanent form over the weekend. Maybe I'll build a second one as a gift. ... Link |
8142 days of detection
mod: 12/3/08, 5:42 AM days of detection... PMOG owner
BiographyRandall Bohn lives in Orem, Utah, USA. He works as a Software Quality Engineer. He is a big fan of the AVR line of microcontrollers. He has been in the computer industry since 1989. Randall is married and has three children. rsbohn can be reached via gmail.com. status
Youre not logged in ... Login
Amazon.com DVD Shop
Amazon.com DVD Shopmenu
search
related
calendar
recent updates
Arduino Starter Kit
MAKE Blog How-to Tuesday posted a challenge: Optimize the sketch code for a pressure sensor bar graph. Here is my second attempt: int gate[] = {10, 20, 50, 100, 200, 32767}; void setup() {DDRB = 0b00111110;} void loop() { int dval = 0; int rval = analogRead(2); for (int x = 0; rval... 12/3/08, 5:42 AM Measuring Supply Voltage
I'm running my latest handheld computer on solar power. It starts up when the sun rises and runs all day. I started wondering how I could measure the voltage coming in from the solar panel. I came up with a way to use a diode and a resistor and the... 7/29/08, 9:53 AM Ten Pin ISP adapter
I've already built a six pin ISP adapter, but my Olmex cards use the ten pin ISP. I put a header on a scrap of perf board, added an LED for the heartbeat, and then connected the ten pin cable. Actually it is a fifteen pin cable, off a joystick... 7/16/08, 10:00 PM Hello 5x7 Style
Wrote a new firmware for the 5x7 display. Now it scrolls out 'hello' over and over again. I'm running it on a solar panel, so it wakes up with the sun and runs all day long. When I built the LED matrix I put resistors on the five columns. I'm starting... 6/17/08, 12:48 PM Provo, Utah
With a walkable downtown and access to two Universities, Provo Utah is a great location. I live next door in Orem. Kipplinger: Provo: Pristine Tech Mecca (Video) (Text) 6/2/08, 10:07 AM Another release of AVRISP sketch
There is a new release of the AVRISP emulation sketch for Arduino: avrisp.02.zip. This one should work with Mega8 and Mega168. mega-isp 5/28/08, 4:48 PM Sorting Out Page Sizes
There is a new release of AVRISP Emulation for Arduino. This is an Arduino firmware that allows you to program other AVR microcontrollers. The new zip file (avrisp.01.zip) should compile on the current Arduino IDE, and I changed the comments that put the wrong labels on the SPI pins. Go ahead... 5/27/08, 11:31 AM Flash Problems
I'm building a project using the AVR ATMega8 microcontroller. Once I got the thing wired up to where I could write firmware to it I found that it was always failing. I made a .hex file full of 0x10 values (256 bytes worth) and tried uploading that to the chip.... 5/16/08, 2:56 PM William's Arduino Board
I'm building an Arduino-compatible board for William. I'm building it on the Evil Mad Scientist MegaXX8 business card. It will have four built-in LEDs and a USB interface. It will also have connectors so he can use it with a breadboard. Perhaps we can connect it to some of his... 5/15/08, 7:26 AM Cybord Signal Detector
Some digital radio signals use Frequency Shift Keying (FSK). This often has one frequency for a Mark and one for a Space. I plan to build a cybord or other chip that will decode an FSK signal, producing three different values: NO_SIGNAL, MARK, and SPACE. The signals would then go... 5/15/08, 7:20 AM destinations
|
